Our products
have been copied
many times, each promising more
for less. Don’t settle for a
look-alike.
The results of
poor quality:
Similar products sacrifice quality for cost. Copied parts are welded together into a product without any understanding, engineering, R&D and testing capabilities. Unreliable economical variety materials are used building the products, putting your equipment at risk for a break-down. The cheaper construction may result in frames bending from impact loading or axles snapping under load. Customers may constantly need to replace parts to keep the products in operation. Look-alike products may be advertised at higher capacities by eliminating or reducing safety capacities. Knock-offs claim higher capacity while exerting so much weight onto the same footprint that the rollers will drag behind instead of actually rolling.
Our Definition of Load Capacity goes further than just working safely below
the break point:
The more weight is exerted onto the dolly’s footprint, the higher the break-out & rolling resistance becomes until too much weight causes the rollers to drag behind, making changing directions impossible. The maximum capacity at which a roller still turns is limited by the pressure exerted onto the footprint (aside from the component strength). That means a 2 ton rated roller may stop turning at 1 ton of weight. Be assured that you maintain “easy rolling” and “easy steering” at maximum capacity with our dollies. |
|
|
Does the product still function at max load capacity, is it reliable and dependable? Do the rollers still turn? Does the jack still hold? Do you need a crowbar to turn the dolly? Does the tool work for one application but not for another?
|
|
Consider the cost of business interruption. What happens if substandard moving equipment breaks in the middle of a job? How high is the cost if a production line goes offline? How can you operate if your load blocks the only loading dock? How high is the hourly or daily cost associated with having a rented crane, flatbed truck and team of engineers and riggers waiting idly for replacement moving equipment to be flown in? What is the cost to overnight new heavy moving equipment?
|
|
Can you rely on your equipment day after day? Can you trust the equipment after 10 years of use to carry loads your business depends on?
|
|
What is the cost of faulty equipment that brings devastation in the form of injured employees and damaged loads?
|
|
Time is money. Do you have to work twice as hard to get the job done? Do you have to work twice as long to complete the move? Do you need twice as many helpers?
|
|
How expensive is it to replace your moving equipment? What is the lifespan of the moving equipment? 1-time use, 6 months, 5 years? In what intervals will you have to re-spend thousands of dollars to replace your equipment?
|
|
Can the equipment be repaired? How often will you have to replace parts due to short life under the tough working conditions, just wear & tear, or due to overloading?
|
|
Assume you have owned our equipment for 10 years and you encounter an uncommon moving application. Who do you call for needed advice?
|
|
Consider the cost of equipment failure, cost of downtime, repair and replacement cost as well as the cost of labor intensity to get the job done. What is the total cost of ownership over years versus what is the lowest initial purchase price?
|
|
Our products are used to lift and transport nuclear reactors and nuclear waste. To a small business this reliability and dependability is equally important as a product failure can be equally devastating. We supply the same product quality to small, medium and large organizations.
|
We aim to completely educate our customers about the advantages but also about the disadvantages, considerations and limitations of our products. We do not overpromise.
|
All products are designed by JUNG’s full time engineering team. Besides continuous improvements to functionality and strength, the products are optimized beyond what the customer expects. For example: The dollies are designed for heat dissipation to counter possible weakening over time as high temperatures build up from the enormous friction forces.
Internal technology is employed to protect against impact loading and design considerations are given to chemical and environmental resistibility. German engineering means test and design for every detail.
|
Our rigging equipment is designed and tested in a dedicated testing facility to improve the products for the most effective and efficient usability. JUNG has engineered over 30 years of continued improvements on their products resulting in significant technological leaps from lookalike products. Use our products to get the job done smarter, faster and with less manpower.
|
Our products are continuously field tested in cooperation with professional riggers that expose the products to rough and tough environments and applications. This experience over 39 years had led to equipment that is built to last, for reliability in the toughest working conditions even after a decade of use.
|
The factory employs state of the art robots in the manufacturing process to assure that every product meets the same quality standards. All products are manufactured in house in Germany. Manufacturing process ISO 9001 certified.
|
We don’t use standard commercial readily available materials. Our materials are specifically formulated, tested and engineered in JUNG’s research and development. Materials are engineered and custom produced for:
- High Strength
- Ease of Use
- Durability under the greatest strain
Each component, steel frame and aluminum composition is built with state of the art technology.
|
All products are function tested after manufactured to guarantee zero defects. Our quality control department tracks all products and components by stamped-in serial numbers to trace any problem to assure zero reoccurrence. A certified quality management program assures a consistent level of quality.
|
Dollies: Our advertised load capacities are safe working load limits. At maximum capacity you operate well below the break-point AND maintain easy rolling. A safety factor will protect against limited temporary overloading due to impact loading or unexpected shift in weight.
Jacks: Each jack comes with a test certificate that it has undergone a static load test. The capacity rating is valid for lifting with the toe as well as the top loading plate. An overload protection valve will protect the user from picking up too much weight.
|
Our product quality is matched by our customer service quality. We support our customers before and after a sale.
- Engineers are available to advise on rigging and moving problems before and after sale.
- Parts and service support
- Warranty coverage support
- Each product comes with a toll-free number for free lifetime technical support
Our modular designs guarantee that every component can be removed and replaced for easy and quick repair if the products are overloaded. We support parts back to 1972. Find parts manuals on our website or call for technical support. We keep you up and running – even after many years of use. All parts are sold at cost. No other company provides a higher quality service level.
|
Each purchase is a one-time investment in superior quality; each product comes with a five year warranty, and is reliable even after a decade of use within its rated capacity.
|
|
